- Kegger Intake Manifold Porting Services and Parts
- >
- Kegger Airflow Wedge (Now stage 2)
Kegger Airflow Wedge (Now stage 2)
Testing has shown the stage 2 did not hinder low rpm and now is used in lieu of the older stage 1 wedge. If you are looking for max HP out of the Kegger with VRPs welded in, this is the wedge to choose. Carbon fiber airfoil wedge to smooth and increase the airflow of the stock or modified factory intake. Reduces turbulence, reduces volume and works perfectly with the VRP plates. Secures to the stock or aftermarket plenum pan with 1/4-20 bolts. Recommend sealing the bottom with rtv or epoxy along with the included stainless hardware. Mark the hardware with a marker, then angle the assembly to the forward and back walls of the intake. Press down lightly to mark the location of the bolts on your belly pan. That will give you the location to drill a <5/16" hole into the belly pan. Smoothing to the print can be done with sandpaper to prep the print. High temp clear coat paint wedge and pan after installation for smoothness. USPS Priority mail included for continental US states. All others billed separately after.